Accessories
Gear Box
- Quarter Turn Manual Gear Actuators
- Totally Enclosed and Sealed for IP 67 And IP 65
- Externally Adjustable Mechanical
- Stops at 0 Deg. To 90 Deg. Deg.)
Technical Specifications
| Body/Cover | Cast Iron (IS 210Gr.FG 220) |
| Gasket | Style – 20 Red Bearing |
| O’ Ring for Shaft | Nitrile Buna-NGr, 80 |
| Worm Gear | ASTM A536 Gr. 80-55-06 BS 2789 GR. 500/7 |
| Worm | BS-970-90, EN-8, 080M40 |
| Shaft | EN8 |
| O’ Ring for Body & Cover | Nitrile Buna-NGr, 80 |
| Brass Bush | Brass |
| Packing Bush | Nitrile Buna-NGr, 80 |
| Dowel Pin | Spring Steel |
| Hex Bolt/Washer | M.S. |
| O’ Ring for Adjustable Hex Bolt | Nitrile Buna-NGr, 80 |
| Indicator | ABS Resin (Acrylonitrile Butadiene Styrene) |
| Indicator Bolt | Stainless Steel (IS-1364 DIN 933) |
| Handwheel | M.S. (Fabricated) with Powder Coated |
| Hand Wheel Hex Bolt/Washer | M.S. |
Accessories
Manual Override Clutch
- ISO Mounting Pattern
- Available For Up To 12,000 Nm Output Torque
- Rugged Declutch Lever and Engage Knob
- Sandwich Mounting, The Declutchable Manual Override Is Sandwich Mounted Between the Actuator and Valve / Damper for A Low-Profile Design.
- Travel Stops, Declutchable Manual Override Has Internal Travel Stops Which Allow for The Valve To Be Independently Operated With The Actuator Removed. (Stroke -0 Deg To 90 Deg + 5 Deg)
Specifications
| Type | Mechanical Switch x 2 | Proximity Sensors P&F Make |
| Switch | Honeywell | P&F | Other on Request |
| Switch Rating | AC 250V 3A, 125V 5A | DC 250V 0.2A, 125V 0.4A, 30V 4A |
| Enclosure Protection | IP 67 |
| Ambient Temperature | -20°C ~ 80°C |
| Conduit Entry | NPT 1/2″ (Other Options Available on Request) |
| Terminal | 8 Points |
| Mounting Bracket | NAMUR VDI / VDE 3845, ISO 5211 (80 mm x 30 mm or 120 mm x 30 mm) (Adjustable Bracket Available on Request) |
| Material | Aluminium Pressure Die Cast |
| Enclosure Cover / Body | Aluminium Diecast, Powder Coated |
| Position Indicator Dome | Polycarbonate |
| Position Indicator | Yellow/Red Open/Close Indicator (ABS) |
| Shaft (Operating Rod) | Stainless Steel |
| Switches | 1 NO + 1 NC / 2 NOS. (As per Client) |
| Cable Entry | 1/2″ NPT (Other on Request) |
| Terminal | Standard Screw Terminal |